Home Products Magnetic Particle Testing MFL-4016 Magnetic Flux Leakage Manual Scanning System
MFL-4016 Magnetic Flux Leakage Manual Scanning System
MFL-4016 Magnetic Flux Leakage Manual Scanning System MFL-4016 Magnetic Flux Leakage Manual Scanning System MFL-4016 Magnetic Flux Leakage Manual Scanning System MFL-4016 Magnetic Flux Leakage Manual Scanning System MFL-4016 Magnetic Flux Leakage Manual Scanning System

MFL-4016 Magnetic Flux Leakage Manual Scanning System

Product ID : MFL-4016
Product Attributes :

The MFL-4016 is a manual magnetic flux leakage (MFL) scanning system used to check and measure corrosion and thickness decrease of ferrous-magnetic pipes and tank bottom plates. It inspects 4-10 mm thickness defects using advanced magnetic material with high remanence and high coercivity. With a small body and easy operation, the MFL-4016 is capable of inspecting the corners of a tank by hand.

It is widely used for tank bottom plate inspection, pipeline corrosion survey, storage tank floor evaluation and in-service wall thinning detection in oil & gas, petrochemical, power plant and water utility maintenance.

Product Description

MFL-4016 MFL Manual Scanning System

MFL-4016 MFL Manual Scanning System is designed to check and measure corrosion and thickness decrease of ferrous-magnetic pipes and tank bottom plates by hand. This device is available to inspect 4-10mm thickness defects for pipes and plates by using the advanced magnetic material with high remanence and high coercivity. With small body and easy operation, MFL-4016 is capable of inspecting the corners of tank by hand.

Application

1.    Storage tank bottom plate and floor corrosion inspection
2.    Oil & gas pipeline and gathering line wall thinning survey
3.    Pressure vessel and boiler shell thickness evaluation
4.    Water tank, chemical tank and in-service tank inspection
5.    Power plant and petrochemical plant in-service inspection

Key Features

1.    16 channels of MFL scanning
2.    Fast scanning with high sensitivity, no need for surface pretreatment before testing
3.    Built in with high-performance lithium battery for working more than 8 hours per charge
4.    Interface: USB, network, encoder port
5.    High resolution TFT LCD display
6.    Easy operation, language in Chinese / English
7.    Testing report is available, and the testing data can be stored and analyzed in PC
8.    Capable of inspecting the corners of the tank to improve the testing coverage
9.    Available to run forward or backward with hand scanning, it can go into small hole (diameter ≥450mm) to do inspection
10.    Working voltage not more than 24V for tank safety requirement
11.    Alarm for defect signal out of accepted range, and alarm for low battery
12.    Real-time data acquisition, analysis, defect location and defect percentage identification

Technical Specification

ItemSpecification
Channel16 channels
Scan width160mm
Max sensitivity20% material loss for 6mm thickness
Drive methodManual drive
Thickness range4 up to 10mm
Coating thicknessLess than 2mm
Display screenHigh resolution TFT LCD display with resolution 640*480
Length clockInner/outer clock
Step distance1-256mm
Max. scanning speed0.5m/s
Gain0-90dB with min. step 0.5dB
FilteringDigital 1-100, high pass 0-500Hz, low pass 10-10000Hz
Power requirementsDC 14.8V, 6.3AH lithium battery, outer voltage DC 19±2 V
Size253 * 87 * 175mm for MFL instrument only
Weight2.4kg for MFL instrument only
Operating temperature-20°C to +55°C
Storage temperature-20°C to +50°C
Memory16G

 

Purchase Includes

No.Item
11 set of MFL instrument
21 set of MFL manual trolley with probe and magnetic device
32 pieces of probe cable
41 set of scanning and analysis software
51 set of battery charger
61 set of quality certificate and user manual
71 instrument case

One year warranty for MFL instrument

Online Inquiry